Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
Cedar Reversed Kerfed Linings http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5831 |
Page 1 of 1 |
Author: | EBarajas [ Sun Mar 26, 2006 11:13 am ] |
Post subject: | |
Does anyone know where I can buy about 20-30 cedar reverse kerved linings? I called guitar jigs but they seemed swamped. Do you guys know of any other source? |
Author: | A Peebels [ Sun Mar 26, 2006 11:56 am ] |
Post subject: | |
I make my own. I resaw my kerfing wood into strips a little thicker than the final size then run it through my thickness sander. I then cut it to double the heighth (sp?) the route the edges round. Next I cut it in half downthe middle and cut the kerfs on my bandsaw. Sounds a lot worse than it is Al |
Author: | Terry Stowell [ Sun Mar 26, 2006 12:29 pm ] |
Post subject: | |
Al & Todd, Where do you guys get your raw stock? |
Author: | TimDet [ Sun Mar 26, 2006 1:08 pm ] |
Post subject: | |
Colonial Tonewoods has Spanish cedar reversed kerfing.Plus the are an OLF sponser |
Author: | EBarajas [ Sun Mar 26, 2006 2:37 pm ] |
Post subject: | |
Thanks for all the good ideas guys! |
Author: | RussellR [ Sun Mar 26, 2006 6:13 pm ] |
Post subject: | |
If you don't want to make it Ed Steve at Colonial stocks it. |
Author: | RussellR [ Mon Mar 27, 2006 6:44 am ] |
Post subject: | |
![]() ![]() ![]() Good to have you back Todd |
Author: | Terry Stowell [ Mon Mar 27, 2006 10:08 am ] |
Post subject: | |
Yes it is. |
Author: | EBarajas [ Mon Mar 27, 2006 4:35 pm ] |
Post subject: | |
I bought the linings fom colonial, they are great to deal with. I am going to use the other ideas in this thread to make some more at a later date. Right now my time is at a premium so buy was better than making this time around. I really appreciated all the help. ![]() |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |